Sale!
ATI Online Analyser Metrinet
Original price was: RM3.00.RM2.00Current price is: RM2.00.
Integrated water quality monitoring system specially designed for potable water distribution monitoring. Up to 16 parameters of digital ‘reagent-less’ sensors. It is an ultra-low powered modular solution for water quality monitoring.
Related products
You may also like
-
Quick ViewATI’s Model Q46C2 Conductivity Monitor provides the reliable and accurate low-level measurements required for such high purity water systems. Monitors provide large, easy-to-read LCD displays with a second display line for indication of temperature or other operational information and for those applications where results in resistivity units are preferred, Q46C2 monitors can be programmed to display readings in Meg-ohm units instead of microSiemens.
-
Quick ViewATI’s Model Q46/88 Suspended Solids Monitor provides real time monitoring of suspended solids in a variety of water and wastewater applications. A submersible sensor immersed in process tanks or effluent channel senses particulates in the water using an optical backscatter technique that allows measurement over a wide range. Results are displayed on the Q46 electronic unit mounted near the sensor with a variety of outputs provided as standard.
-
Quick ViewQ46H Monitors provide a large format concentration display with a second alpha-numeric lower line for secondary information. The monitor provides two standard 4-20 mA analog output and three SPDT relays. If desired, one analog output can be configured for PID control use. In addition, the monitor provides options for digital communications including Profibus-DP, Modbus-RTU, and Ethernet-IP. Auto-Chem chemistry systems include peristaltic pumps for sample and reagents, air supply for the stripping system, and gas conditioning components. All components are easily accessible from the front of the unit making service quick and easy. Attached to the bottom of the enclosure is an inlet overflow chamber where sample and drain connections are made. A sample flow rate of 5 - 20 gallons per hour (300-1200 ml/min.) is recommended.
-
Quick ViewATI’s Model Q46/76 Turbidity Monitor is designed to meet the needs of both municipal drinking water systems and industrial water treatment for reliable, low-range turbidity measurement. Q46/76 monitors also provide sensor diagnostic functions to warn of conditions that cause inaccurate or invalid readings. The sensor is continuously monitored for optical fouling, and will display an alarm message should the sensor require cleaning. In addition, the sensor will detect the lack of water in the flowcell and provide a “dry cell” when an air interface is detected. These alarm conditions will cause a third alarm relay to activate, which can be used to indicate these conditions remotely.
Reviews
There are no reviews yet.